Reset the normalization used in correcting the background.
|Syntax:||cornorm||[[<spectrum range>...] [<cornorm>]]...|
where <spectrum range> =:: <first spectrum no.> - <last spectrum no.> is a range of spectra to which the correction is to be applied and <cornorm> is the value to be used for the normalization. A decimal point (.) is used to distinguish a correction norm from a single spectrum <spectrum range>. If no correction norm is given, then the last value input is used (the initial value is one (1)). If no range is given, then the last single range input is modified. (See the corfile command.)
Assume that there are four spectra, all with associated correction files already defined, either by default in their PHA file, or explicitly by using the corfile command.
XSPEC12> cornorm 1-4 1. //The correction norm for all four is set to 1.0 XSPEC12> cornorm 0. 1-2 0.3 //The correction norm for the last input range (which was 1-4) // is set to 0., then files 1 and 2 are reset to 0.3. XSPEC12> cornorm 4 //file 4 has the correction also set to 0.3. XSPEC12> cornorm 1 4 -.3 //files 1 and 4 are set to -.3. XSPEC12> cornorm .7 //file 4 (as the last input single range) is set to 0.7.